Photonic Hall Effect in ferrofluids: Theory and Experiments

An experimental and theoretical study on the Photonic Hall Effect (PHE) in liquid and gelled samples of ferrofluids is presented. The ferrofluids are aqueous colloidal suspensions of Fe(_{2})CoO(_{4}) particles, which can be considered as anisotropic and absorbing Rayleigh scatterers. The PHE is found to be produced by the orientation of the magnetic moments of the particles, as is also the case for the Faraday effect. The dependence of the PHE with respect to the concentration of the scatterers, the magnetic field and the polarization of the incident light is measured in liquid and in gelled samples and is compared to a simple model based on the use of a scattering matrix and the single scattering approximation.Comment: 20 pages, 11 figures, submitte

Selectively boron doped homoepitaxial diamond growth for power device applications

Diamond lateral growth is a powerful technique for the design and fabrication of diamond-based power electronic devices. Growth orientation affects the diamond deposition in terms of growth rate, surface roughness, and impurity incorporation. It has been shown that the finally grown surface of a patterned substrate can be predesigned based on the growth conditions. Thus, simultaneous growth along different surface orientations yields regions with different properties. In line with this, the incorporation of boron in a microwave plasma enhanced chemical vapor deposition laterally deposited epilayer over a mesa patterned {100}-oriented diamond substrate was studied by cathodoluminescence. It was observed that laterally oriented facets were highly boron doped in contrast to the {100}-oriented surfaces, which did not show any bound exciton emission, related to the doping. This study shows that, by designing the initial pattern and tuning the conditions, it is possible to drive a selective incorporation of boron into the grown layer

Persistent topology for natural data analysis - A survey

Natural data offer a hard challenge to data analysis. One set of tools is being developed by several teams to face this difficult task: Persistent topology. After a brief introduction to this theory, some applications to the analysis and classification of cells, lesions, music pieces, gait, oil and gas reservoirs, cyclones, galaxies, bones, brain connections, languages, handwritten and gestured letters are shown

Structural recovery of ion implanted ZnO nanowires

5 pagesInternational audienceIon implantation is an interesting method to dope semiconducting materials such as zinc oxide provided that the implantation-induced defects can be subsequently removed. Nitrogen implantation followed by anneals under O2 were carried out on zinc oxide nanowires in the same conditions as in a previous study on bulk ZnO [J. Appl.Phys. 109, 023513 (2011)], allowing a direct comparison of the defect recovery mechanisms. Transmission electron microscopy and cathodoluminescence were carried out to assess the effects of nitrogen implantation and of subsequent anneals on the structural and optical properties of ZnO nanowires. Defect recovery is shown to be more effective in nanowires compared with bulk material due to the proximity of free surfaces. Nevertheless, the optical emission of implanted and annealed nanowires deteriorated compared to as-grown nanowires, as also observed for unimplanted and annealed nanowires. This is tentatively attributed to the dissociation of excitons in the space charge region induced by O2 adsorption on the nanowire surface

Development of a Novel Concept of Solar Receiver/Thermal Energy Storage System Based on Compartmented Dense Gas Fluidized Beds

See next page for additional author

Persistence modules, shape description, and completeness

Persistence modules are algebraic constructs that can be used to describe the shape of an object starting from a geometric representation of it. As shape descriptors, persistence modules are not complete, that is they may not distinguish non-equivalent shapes. In this paper we show that one reason for this is that homomorphisms between persistence modules forget the geometric nature of the problem. Therefore we introduce geometric homomorphisms between persistence modules, and show that in some cases they perform better. A combinatorial structure, the $H_0$-tree, is shown to be an invariant for geometric isomorphism classes in the case of persistence modules obtained through the 0th persistent homology functor

Pheochromocytoma diagnosed during pregnancy: lessons learned from a series of ten patients

BACKGROUND: Pheochromocytoma (PHEO) in pregnancy is a life-threatening condition. Its management is challenging with regards to the timing and type of surgery. METHODS: A retrospective review of the management of ten patients diagnosed with pheochromocytoma during pregnancy was performed. Data were collected on the initial diagnostic workup, symptoms, treatment, and follow-up. RESULTS: PHEO was diagnosed in ten patients who were between the 10th and the 29th weeks of pregnancy. Six patients had none to mild symptoms, while four had complications of paroxysmal hypertension. Imaging investigations consisted of MRI, CT scan and ultrasounds. All had urinary metanephrines, measured as part of their workup. Three patients had MEN 2A, one VHL syndrome, one suspected SDH mutation. All patients were treated either with α/β blockers or calcium channel blockers to stabilize their clinical conditions. Seven patients underwent a laparoscopic adrenalectomy before delivery. Three out of these seven patients had a bilateral PHEO and underwent a unilateral adrenalectomy of the larger tumor during pregnancy, followed by a planned cesarean section and a subsequent contralateral adrenalectomy within a few months after delivery. Three patients had emergency surgery for maternal or fetal complications, with C-section followed by concomitant or delayed adrenalectomy. All newborns from the group of planned surgery were healthy, while two out three newborns within the emergency surgery group died shortly after delivery secondary to cardiac and pulmonary complications. CONCLUSIONS: PHEO in pregnancy is a rare condition. Maternal and fetal prognosis improved over the last decades, but still lethal consequences may be present if misdiagnosed or mistreated. A thorough multidisciplinary team approach should be tailored on an individual basis to better manage the pathology. Unilateral adrenalectomy in a pregnant patient with bilateral PHEO may be an option to avoid the risk of adrenal insufficiency after bilateral adrenalectomy

Co-firing of biomass and other wastes in fluidised bed systems

A project on co-firing in large-scale power plants burning coal is currently funded by the European Commission. It is called COPOWER. The project involves 10 organisations from 6 countries. The project involves combustion studies over the full spectrum of equipment size, ranging from small laboratory-scale reactors and pilot plants, to investigate fundamentals and operating parameters, to proving trials on a commercial power plant in Duisburg. The power plant uses a circulating fluidized bed boiler. The results to be obtained are to be compared as function of scale-up. There are two different coals, 3 types of biomass and 2 kinds of waste materials are to be used for blending with coal for co-firing tests. The baseline values are obtained during a campaign of one month at the power station and the results are used for comparison with those to be obtained in other units of various sizes. Future tests will be implemented with the objective to achieve improvement on baseline values. The fuels to be used are already characterized. There are ongoing studies to determine reactivities of fuels and chars produced from the fuels. Reactivities are determined not only for individual fuels but also for blends to be used. Presently pilot-scale combustion tests are also undertaken to study the effect of blending coal with different types of biomass and waste materials. The potential for synergy to improve combustion is investigated. Early results will be reported in the Conference. Simultaneously, studies to verify the availability of biomass and waste materials in Portugal, Turkey and Italy have been undertaken. Techno-economic barriers for the future use of biomass and other waste materials are identified. The potential of using these materials in coal fired power stations has been assessed. The conclusions will also be reported